DigiDesign Digi 002 Getting Started Manual page 121

Delay Controls
To access the controls for the onboard Delay:
Press the Master Fader switch.
1
Press the Channel Select switch on the Delay
2
return channel.
The onboard Delay controls are distributed
across the Channel Scribble Strips as shown in
Table 13. The first row of the table shows the
function of the Rotary Encoders, and the bot-
tom row of the table shows the function of the
Channel Select switches in this view.
When you are finished setting the Delay con-
3
trols, press the Escape key to return to the Mas-
ter Fader view.
Table 13. Delay controls in Digi 002 Stand-alone mode
Display Time
Rotary Encoder
Delay Time
Channel Select
Table 14. Reverb controls in Digi 002 Stand-alone mode
Display Room
Rotary
Room
Encoder
Type
Fdbak
Feedback
PDly LPF
Pre-Delay Low-Pass
Time Filter
Reverb Controls
To access the controls for the onboard Reverb:
Press the Master Fader switch.
1
Press the Channel Select switch on either of
2
the Reverb return channels.
The onboard Reverb controls are distributed
across the Channel Scribble Strips as shown in
Table 14. The table shows the function of the
Rotary Encoders in this view.
When you are finished setting the Reverb con-
3
trols, press the Escape key to return to the Mas-
ter Fader view.
LPF
Low-pass Filter
Smer Damp
Smear Damping
Chapter 10: Using Digi 002 as a Stand-Alone Mixer
D —> R
Delay Send to Reverb
Pre/Post
Diff Time
Diffusion Reverb
Decay
Time
113