Storing Snapshots - DigiDesign Digi 002 Getting Started Manual

Storing Snapshots

Digi 002 allows you to store up to 24 stand-
alone mix configurations and recall them at any
time. You can use snapshots to create mix tem-
plates or to capture a mix in progress.
A 25th mix configuration, containing stand-
alone system defaults, can be recalled, but can-
not be modified or renamed.
Snapshots store the following information for
each input channel:
• Channel name
• Channel fader position
• Channel pan position
• EQ and compressor settings
• Send levels
To store a snapshot of a mix configuration:
Arrange mixer controls, name channels, and
1
set effects controls as desired.
Return to Home View by pressing the Pan
2
switch in the upper left-hand corner of the Con-
sole View area.
Press F3 (Snapshot).
3
Press the Channel Select switch under Save.
4
Turn the Rotary Encoder under the snapshot
5
number to set the number (1–24).
Press the Left and Right Arrow keys in the
6
Navigation section of Digi 002 to move the cur-
sor in the Scribble Strip display.
If you want to rename the snapshot, press the
7
Left and Right Arrow keys in the Navigation Sec-
tion, and turn the Rotary Encoder under the
snapshot number to change each character in
the snapshot name.
114 Digi 002 & Digi 002 Rack Getting Started Guide
Press the flashing Channel Select switch to
8
save the snapshot, or press the Escape switch
twice to cancel the operation and return to
Home View.
To recall a snapshot:
Return to Home View by pressing the Pan
1
switch in the upper left-hand corner of the Con-
sole View area.
Press F3 (Snapshot).
2
Press the Channel Select switch under Load.
3
Turn the Rotary Encoder under the snapshot
4
number to recall the desired snapshot. (Snap-
shot #25 returns Digi 002 to its default settings.)
Press the flashing Channel Select switch to
5
load the snapshot, or press the Escape switch
twice to cancel the operation and return to
Home View.