DigiDesign Digi 002 Getting Started Manual page 119

Dynamics Controls
To access Dynamics controls for a track:
Press the Dynamics switch in the Channel
1
View area above the Channel Scribble Strips.
Press the Channel Select switch on the chan-
2
nel whose Dynamics controls you want to dis-
play.
The onboard compressor controls are distrib-
uted across the Channel Scribble Strips as shown
in Table 12. The second row of the table shows
the function of the Rotary Encoders, and the
bottom row of the table shows the function of
the Channel Select switches in this view.
When you are finished setting the Dynamics
3
controls, return to Home View by pressing the
Pan switch in the Console View area.
Table 12. Compressor controls in Digi 002 Stand-alone mode
Inpt
Display
Rotary Input
Encoder Gain
Channel
Select
Thsh Rtio
Threshold Compres-
sion Ratio
You can bypass Dynamics processing at any
time by pressing the Master Bypass switch in the
Channel View area. The Master Bypass switch
bypasses compression for the selected channel.
To bypass Dynamics controls for a track:
Press the Dynamics switch in the Channel
1
View area above the Channel Scribble Strips.
Press the Channel Select switch on the chan-
2
nel whose Dynamics controls you want to by-
pass.
Press the Master Bypass switch. The switch
3
flashes to indicate that the displayed compres-
sor is currently bypassed.
Atck Rels Knee
Attack Release Knee Type
Time Time
Toggle Hard
and Soft
Knee
Chapter 10: Using Digi 002 as a Stand-Alone Mixer
Phas Outp
Phase Output
Invert Gain
Toggle Nor-
mal and
Invert
111