DigiDesign Digi 002 Getting Started Manual page 44

Insert/Send Position Selectors
These switches determine which of the five
available insert positions (marked A–E in
Pro Tools) or ten available send positions
(marked A–J in Pro Tools) are displayed in Con-
sole View.
To view Inserts A–E, put Digi 002 in Inserts
view, and press the corresponding switch A–E.
To view Sends A–E, put Digi 002 in Sends
view, and press the corresponding switch (A, B,
C, D, or E).
To view Sends F–J, put Digi 002 in Sends view,
then hold Shift/Add and press the correspond-
ing switch (A=F, B=G, C=H, D=I, or E=J). The
switches flash to indicate display of Sends F–J.
Channel View
Channel View zooms in on a single track and
displays all controls of a certain type (sends, in-
serts, or plug-ins) horizontally, across all of the
Channel Scribble Strips on Digi 002. From this
view, you can recall and edit parameters for all
the sends on a single track, or all the parameters
of a single plug-in.
Channel View Selectors
These switches determine the type of informa-
tion displayed for a selected track. The first two
switches focus on particular types of plug-ins,
while the second two address all types of inserts
and sends.
EQ When you press the EQ switch, Digi 002
identifies channels with equalizer plug-ins as-
signed to them by illuminating their Channel
Select switches. If no EQ plug-ins are present, no
Channel Select switches will be lit.
36 Digi 002 & Digi 002 Rack Getting Started Guide
When you press an illuminated Channel Select
switch, controls for the first EQ plug-in on that
track are assigned to the rotary encoders and dis-
played in the Channel Scribble Strips. Switched
controls, such as Master Bypass or Phase Invert
functions, are controlled by the Channel Select
switches.
To cycle through all the EQ plug-ins on a chan-
nel, hold the EQ switch and repeatedly press the
track's Channel Select switch. If a plug-in win-
dow is open on-screen, it will update to reflect
the plug-in selected on the Digi 002.
Dynamics When you press the Dynamics switch,
Digi 002 identifies channels with dynamics
plug-ins (such as compressors or limiters) as-
signed to them by illuminating their Channel
Select switches. If no dynamics plug-ins are
present, no Channel Select switches will be lit.
When you press an illuminated Channel Select
switch, controls for the first Dynamics plug-in
on that track are assigned to the rotary encoders
and displayed in the Channel Scribble Strips.
Switched controls, such as Phase Invert or
In/Out for EQ bands, are controlled with the
Channel Select switches below the correspond-
ing Scribble Strips.
To cycle through all the Dynamics plug-ins on a
channel, hold the Dynamics switch and repeat-
edly press the track's Channel Select switch. If a
plug-in window is open on-screen, it will update
to reflect the plug-in selected on the Digi 002.
Inserts When you press the Inserts switch,
Digi 002 identifies channels with any insert as-
signed to them (including software plug-ins or
hardware I/O inserts) by illuminating their
Channel Select switches. If no inserts are
present, no Channel Select switches will be lit.