Save & Exit Setup - DFI G7L332-L User Manual

Save & Exit Setup
When all the changes have been made, highlight "Save & Exit Setup"
and press <Enter>.
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Esc : Quit
F10 : Save & Exit Setup
Type "Y" and press <Enter>. The modifications you have made will
be written into the CMOS memory, and the system will reboot. You
will once again see the initial diagnostics on the screen. If you wish to
make additional changes to the setup, press <Ctrl> <Alt> <Esc>
simultaneously or <Del> after memory testing is done.
Phoenix - AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
SAVE to CMOS and EXIT (Y/N)? Save & Exit Setup
Exit Without Saving
↑ ↓ → ←
Save Data to CMOS
BIOS Setup
: Select Item
3
87