Irda Connector - DFI G7L332-L User Manual

IrDA Connector

Connect the cable connector from your IrDA module to the IrDA
connector.
Note:
The sequence of the pin functions on some IrDA cable may be
reversed from the pin function defined on the system board.
Make sure to connect the cable connector to the IrDA connec-
tor according to their pin functions.
BIOS Setting
Configure IrDA in the Integrated Peripherals submenu ("Super IO
Device" field) of the BIOS. Refer to chapter 3 for more information.
Driver Installation
You may need to install the proper drivers in your operating system
to use the IR function. Refer to your operating system's manual or
documentation for more information.
Hardware Installation
VCC
1
N. C.
IRRX
Ground
IRTX
5
2
47