Chapter 1 - Introduction; Specifications - DFI G7L332-L User Manual

1
Introduction

Chapter 1 - Introduction

Specifications

Processor
Chipset
System Memory
Expansion Slots
Graphics
Audio
LAN
Serial ATA
IDE
8
• LGA 775 socket for:
® TM
- Intel Core 2 Duo
® ®
- Intel Pentium Dual-Core E2000 series
® ®
- Intel Pentium 4
® ®
- Intel Celeron 400 series
® ®
- Intel Celeron D
• Supports FMB 05A/06 up to 95W CPU
• Suppor ts Intel Enhanced Memor y 64 Technology
(EMT64T)
• Supports Enhanced Intel SpeedStep Technology (EIST)
• Supports Intel Hyper-Threading Technology
• Supports 800/533MHz FSB
®
• Intel chipset
®
- Northbridge: Intel
®
- Southbridge: Intel
• Two 240-pin DDR2 DIMM sockets suppor t up to 2GB
system memory
• Supports DDR2 533 and DDR2 667 DIMMs
• Supports dual channel (128-bit wide) memory interface
• Supports non-ECC x8 and x16 DIMMs
• Supports 4 banks for all DDR2 devices up to 512Mbit
density
• Supports 8 banks for 1Gbit DDR2 devices
• Supports unbuffered DIMMs
• 1 PCI Express x16 slot
• 2 PCI Express x1 slot
• 1 PCI slots
• Built-in Intel Graphics Media Accelerator 950
• 6-channel audio CODEC
• Full-duplex codec with independent variable sampling rate
• True stereo line level outputs
• S/PDIF-in/out interface
• RTL8110SC Gigabit ethernet controller
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps)
compliant
• Suppor ts four SATA (Serial ATA) interfaces which are
compliant with SATA 1.0 specification
• SATA speed up to 3Gb/s
• Supports up to UltraDMA 100Mbps hard drives
• PIO Mode 4 Enhanced IDE (data transfer rate up to
14MB/sec.)
945GC Express chipset
ICH7