System Memory - DFI G7L332-L User Manual

Warning:
. .
.
.
.
.
.
.
Electrostatic discharge (ESD) can damage your system board,
processor, disk drives, add-in boards, and other components. Perform
the upgrade instruction procedures described at an ESD workstation
only. If such a station is not available, you can provide some ESD
protection by wearing an antistatic wrist strap and attaching it to a
metal part of the system chassis. If a wrist strap is unavailable,
establish and maintain contact with the system chassis throughout
any procedures requiring ESD protection.

System Memory

The G7L332-L system board supports two 240-pin DDR2 DIMM
sockets. The sockets are divided into 2 channels:
Channel A - DDR2-1
Channel B - DDR2-3
Hardware Installation
DDR2-1
DDR2-2
DDR2-3
DDR2-4
2
15