Pc Health Status - DFI G7L332-L User Manual

PC Health Status

Current System Temp.
Current CPU Temperature
Current System FAN Speed
Current CPU FAN Speed
Vcore
V3SB
Vcc3
Vcc5
+12V
V5SB
VBAT
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Current System Temp, Current CPU Temperature, Current System Fan
Speed and Current CPU Fan Speed
These fields will show the internal temperature of the system, current
temperature of the CPU, and the current fan speed of the cooling fans
in RPM (Revolutions Per Minute).
Vcore to VBAT
These fields will show the output voltage of the monitored devices or
components.
Note:
The onboard hardware monitor function is capable of detecting
"system health" conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Hardware Monitor utility.
This utility is included in the CD that came with the system
board. Refer to the Hardware Monitor section in chapter 4 for
more information.
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
0 RPM
1548 RPM
1.23V
3.34V
3.07V
4.75V
11.89V
4.72V
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
o
36 C
o
48 C
Menu Level
3V
F10: Save ESC: Exit
F7: Optimized Defaults
BIOS Setup
Item Help
F1: General Help
81
3