Parallel Port - DFI G7L332-L User Manual

Parallel Port

Parallel
The system board has a standard parallel port for interfacing your
PC to a parallel printer. It supports SPP, ECP and EPP.
Setting
SPP
(Standard Parallel Port)
ECP
(Extended Capabilities Port)
EPP
(Enhanced Parallel Port)
BIOS Setting
Configure the parallel port in the Integrated Peripherals submenu
("Super IO Device" section) of the BIOS. Refer to chapter 3 for
more information.
Hardware Installation
Function
Allows normal speed operation but
in one direction only.
Allows parallel port to operate in
bidirectional mode and at a speed
faster than the SPP's data transfer
rate.
Allows bidirectional parallel port op-
eration at maximum speed.
2
33