Power Connectors - DFI G7L332-L User Manual

Power Connectors

We recommend that you use a power supply that complies with the
ATX12V Power Supply Design Guide Version 1.1. An ATX12V
power supply has a standard 24-pin ATX main power connector
and a 4-pin +12V power connector that must be inserted onto
their corresponding connectors.
The 4-pin +12V power connector enables the delivery of more
+12VDC current to the processor's Voltage Regulator Module
(VRM).
The system board requires a minimum of 300 Watt power supply
to operate. Your system configuration (CPU power, amount of
memory, add-in cards, peripherals, etc.) may exceed the minimum
power requirement. To ensure that adequate power is provided, we
strongly recommend that you use a minimum of 400 Watt (or
greater) power supply.
Important:
Insufficient power supplied to the system may result in instabil-
ity or the add-in boards and peripherals not functioning prop-
erly. Calculating the system's approximate power usage is im-
portant to ensure that the power supply meets the system's
consumption requirements.
Hardware Installation
3 4
+12V
+12V
Ground
Ground
1 2
1 2 2 4
COM
+3.3VDC
+12VDC
+5VDC
+12VDC +5VDC
+5VDC
+5VSB
PWR_OK NC
COM COM
COM
+5VDC
COM
COM
PS_ON#
+5VDC
COM COM
-12VDC
+3.3VDC
+3.3VDC
+3.3VDC
1 1 3
2
49