Funkwerk EGO FLASH Operation Manual page 43

Problem Cause Remedy
Disconnect system from the mains power supply and check
Incorrect connection of the components
connection, remedy any connection faults
iPod cannot be connected
TM
EGO iDapter was not completely initialized Shut down and restart system
to the EGO system
EGO iDapter cable not completely connected Reconnect cable to iPod
TM
Simultaneously press the green button and the „up" button for longer
System no longer reacts to
than 2 seconds. After a short wait time, the EGO FLASH initializes
operation
itself again
|
42 43