Table of Contents
Advertisement
6.1.6 Car audio line-in input
A car audio with a line-in input option is required for music reproduction in stereo. As an alternative to line-in, the car audio may
have a mini-ISO port (block connector C), a 0.14 in jack socket or a RCA input socket. An appropriate adapter lead is required for
the connection between the EGO FLASH line-out and the line-in version of your audio system. If your car audio system has no
line-in option, you can employ the optionally available Stereo Mute Box for stereo reproduction in combination with your car's front
speakers.
6.2
Verbauorte
INSTALLATION LOCATIONS! Unsuitable installation locations may become a source of injury in an accident (or emergency braking)
situation, or may inhibit the correct functioning of essential safety equipment!
6.2.1 Checking cable lengths
Before you've securely installed the components, check that the instal-
lation locations have been selected in such a way that the cable length
is sufficient to connect the individual components.
6.2.2 Selection of the installation location for the electronics box
The Bluetooth
antenna for the connection to the mobile phone is
®
installed in the electronics box. The antenna transmits directionally
towards the front. For this reason, during installation, ensure that the
antenna faces into the passenger cell (see Fig. 02). Vertical mounting is
ideal. Metallic screening between the front panel and the passenger cell, such as metal or metallised plastic panels, are unsuita-
ble and may interfere with the Bluetooth
also unsuitable.
A covering in plastic, fabric or wood presents no problems whatsoever.
connection. Locations behind the dashboard or in a metal-lined glove compartment are
®
Fig. 02:
Signal
transmission of
the Bluetooth
®
antenna
|
10
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EGO FLASH and is the answer not in the manual?
Questions and answers