Messages; Voice Control - Funkwerk EGO FLASH Operation Manual

by selecting the corresponding upper list entries. Some mobile phones do not support access to the call list; in this case, a call
list is maintained within the EGO FLASH.

7.5.7 Messages

Symbol:
The EGO FLASH supports the sending and receiving of text messages. The menu is structured in same form users are familiar
with from their mobile phones. Messages received can be viewed under the "Incoming SMS" item. The sender of the message can
be called back by phone using the "Call-back" function. You may also reply to the sender with a text message (SMS). In addition,
new messages may be recorded.
Various templates are available to you for answering a text message. Select one of these and confirm with the „Send" button. The
message is sent.
If you do not wish to answer an SMS but rather to send a new SMS, select the „New message" button. Here you can once again
select a template and then send this. In addition, you can enter the telephone number by hand or select a contact from the phone-
book.
You will find the „Read aloud" item under the SMS text. You have the option here of having the SMS read aloud. You can also acti-
vate this function by selecting one of the SMSs shown in the list and holding down the button.
If the SMS function via Bluetooth is not supported by the mobile phone, then the Messages menu item cannot be selected in the
EGO FLASH.
7.6

Voice control

The dialogue-guided voice control of the EGO FLASH allows you to select a name or number via voice input. While numerical se-
lection allows you to directly announce a number, you also have the option to select the name directly from the contacts list.
Language
Depending on the national version of your EGO FLASH, voice recognition supports up to 3 languages, one of which is activated. To
switch the active recognition language, within the menu, select "Setting → Voice control → Language". A list of available lan-
guages is now displayed. Select the desired language and confirm it by pressing the button. The EGO FLASH will now save
your settings and will begin updating the recognition language. The status of this process will be displayed with a progress bar.
Activation and sequence
Voice control is only possible when there is no phone call in progress. If under these circumstances the key is pressed for
longer than a half-second, the "Main menu" standby text sounds, and the display shows the announcement, "Please begin spea-
king ...".
|
36 37