Music Player - Funkwerk EGO FLASH Operation Manual

→ Forward (track-by-track in the current playlist)
→ Backward (track-by-track in the current playlist)
→ Volume control
The iPod is charged via the EGO iDapter. The iPod charging can be manually switched off under Options in the „Settings" menu
TM TM
item in the iPod player
TM

7.5.4 Music player

Symbol:
The music player is activated through the main menu. The music player may also be activated without a mobile phone being cou-
ple to the EGO FLASH. In order to play back music, the EGO FLASH must be coupled to an A2DP-capable device (such as a mobile
phone with A2DP, an iPod™ or an MP3-Player with A2DP adapter).
Connection / coupling
Under the "Option" menu item, a "New device" may be coupled, or an already coupled device may be connected. A total of 10 devices
may be coupled, whereas only one device may be active. If a "New device" is selected, a Bluetooth device search is performed. The
®
desired device can be selected from there.
If the music device does not support coupling from other devices, it is also possible to couple the EGO FLASH from the music device
via the "Couple from device" menu item. In both cases, a four-digit PIN code is displayed by the EGO FLASH, which must be entered
into the music device. Is the PIN is incorrect, the menu jumps back to device selection, and you must repeat the process. If an iPod™
or MP3 player with an A2DP adapter is used, these devices couple automatically with the EGO FLASH. For this, the "Couple from
device" menu item must be selected during the search for devices. After coupling, all playback functions are available to the user.
Playback
The following functions are available for playback and are shown in the display:
→ Play
→ Pause
→ Stop
→ Forwards (by title)
→ Reverse (by title)
→ Volume setting (playback volume adjustable in 10 steps)
These functions are controlled with the keys of the control unit. For a description of these keys, please see the "Symbols" chapter.
|
34 35