Funkwerk EGO FLASH Operation Manual page 38

You may cancel each voice dialogue at almost any time with another prolonged pressing of the
ting for a voice command, you may end the dialogue by saying "abort".
If there is no Bluetooth
The following voice commands are possible:
→ "Call / dial <name>"
→ "Call / dial <name>
→ "Dial number"
→ "Help"
→ "Redial / call again"
→ "Abort / Cancel"
"Call / Dial <name>"
This command may be used to select a name from the contacts list. The name must be contained in the contacts list for this com-
mand to function. If the name is not recognized or found, the EGO FLASH responds with "Please repeat" and offers you the chance
to repeat the command. If the name is recognized, you will be asked if the name should really be dialed. The following commands
are available to you:
→ "Yes / Call / Dial"
→ "No / Back"
→ "Abort / Cancel"
→ "Help"
"Call / Dial <name> at home ... on the cell phone"
With this command, you may dial a specific type of number from a contacts list entry. If the name is recognized, you will be asked
if the name should really be dialed. The following commands are available to you:
→ "Yes / Call / Dial"
→ "No / Back"
→ "Abort / Cancel"
→ "Help"
EGO FLASH
phone connected to the EGO FLASH, voice-activated dialing cannot be activated.
®
at home ...
at work / in the office / on business ...
on the cell phone"
Dials the number stored under that name
The number for the recognized name is not dialed
Ends the dialogue without carrying out a function
Calls up Help and an explanation of possible commands
Dials the number stored under that name
The number for the recognized name is not dialed
Ends the dialogue without carrying out a function
Calls up Help and an explanation of possible commands
key. If the EGO FLASH is wai-