Removing Punch Waste - Canon 3245 Troubleshooting Manual

Removing Punch Waste

2
When the punch waste tray of the optional Puncher Unit-M1 becomes full, a screen similar to the one
shown below appears on the touch panel display. Follow the procedure described below to remove
the punch waste.
This procedure is necessary only if the optional Puncher Unit-M1 is attached.
Finisher-AE1/Saddle Finisher-AE2/Puncher Unit-M1 (Optional)
2-46
When closing the front cover of the finisher, be careful not to get your fingers caught, as this
may result in personal injury.
When you have replaced the staple cartridge, be sure to manually reposition the staples in the saddle
stitcher unit. (See e-Manual > Additional Functions.)