Automatic Feeder Cleaning - Canon 3245 Troubleshooting Manual

Automatic Feeder Cleaning

If your originals have black streaks or appear dirty after scanning them through the feeder, clean the
rollers of the feeder.
This procedure is necessary only if the optional Feeder (DADF-U1) (standard-equipped for the imageRUNNER
3245/3245i/3235i/3235i) is attached.
It takes approximately 20 seconds to clean the feeder.
1
Press
Cleaning].
2
Place 10 sheets of blank paper into the feeder → press [Start].
Make sure that you fan the sheets of paper well.
Use LTR paper (16 to 20 lb bond (60 to 80 g/m
When cleaning is complete, try scanning again.
To cancel feeder cleaning while it is in progress, press [Cancel].
(Additional Functions) → [Adjustment/Cleaning] → [Feeder
2 )).
Routine Cleaning
2
2-61