Saddle Stitcher Unit (Optional) - Canon 3245 Troubleshooting Manual

7
3

Saddle Stitcher Unit (Optional)

If a staple jam occurs inside the saddle stitcher unit of the optional Saddle Finisher-AE2, a screen
similar to the one shown below appears on the touch panel display. Check the location of the staple
jam, and follow the procedure described below, and the procedure that appears on the touch panel
display, to remove any jammed staples.
Clearing Staple Jams
3-86
Close the front cover of the finisher.
The Optional Saddle Finisher-AE2
When closing the front cover of the finisher, be careful not to get your fingers caught, as this
may result in personal injury.
When you have cleared the staple jam, be sure to manually reposition the staples in the saddle stitcher unit.
(See e-Manual > Additional Functions.)
The Optional Finisher-AE1