List Of Error Codes Without Messages - Canon 3245 Troubleshooting Manual

Original scanning area (thin glass strip) is dirty.
Cause
Remedy
This number has not been registered. Enter the number again.
Cause
Remedy

List of Error Codes without Messages

If a job or operation does not complete successfully, check the error code, and perform the necessary
3
operations according to the error code displayed. You can check the error code on the Details screen
when you press [Log] on the System Monitor screen. (See e-Manual > Basic Operations.)
If a send, receive, or fax job does not complete successfully, the error code is printed in the Results
column on the Activity Report and Send Report. However, if a send job is canceled, "STOP" is printed
in the Results column on the Send Report. (See e-Manual > Send/Fax.)
Perform the necessary procedures according to the error code.
# 001
Cause 1
Remedy
Cause 2
Remedy
# 009
Cause 1
Remedy
Cause 2
Remedy
List of Error Messages
3-94
The feeder's scanning area is dirty.
Clean the feeder's scanning area. (See "Manual Feeder Cleaning, " on p. 2-56.)
The department ID and password you entered are not registered.
Contact the system manager of your department for the correct Department ID and password.
Different sized originals were scanned without setting the Different Size Originals mode.
Set the Different Size Originals mode, and then try scanning again.
Different sized originals were scanned in the 2-Sided Original without setting the Different Size
Originals mode.
Set the Different Size Originals mode, and then try scanning again.
There is no paper.
Load paper. (See "Paper Drawers, " on p. 2-2.)
The paper drawer is not inserted correctly into the machine.
Insert the paper drawer properly. (See "Paper Drawers, " on p. 2-2.)