Removing Punch Waste - Canon iR3245 Troubleshooting Manual

Removing Punch Waste

When the punch waste tray of the optional Puncher Unit-Q1/R1/S1 becomes full, a screen similar to
the one shown below appears on the touch panel display. Follow the procedure described below to
remove the punch waste.
2
This procedure is necessary only if the optional Puncher Unit-Q1/R1/S1 is attached.
1
Open the front cover of the finisher.
Finisher-S1/Puncher Unit-Q1/R1/S1 (Optional) 2-35