Removing Punch Waste - Canon imageRUNNER C5051 ADVANCE Maintenance Manual

Removing Punch Waste

When the punch waste tray of the Puncher becomes full, a screen prompting you to remove the punch waste appears on the
touch panel display. Follow the procedure described below to remove the punch waste.
This procedure is necessary only if the Puncher is attached.
1
1
Open the front cover of the punch waste tray .
2
Pull out the punch waste tray .
3
Discard the punch waste .
Make sure that the punch waste tray is completely emptied.
1-36
Staple Finisher-C1/Booklet Finisher-C1/Puncher (Optional)