Envelope Feeder Attachment-C2 (Optional); How To Use The Envelope Feeder Attachment - Canon 3245 Troubleshooting Manual

Envelope Feeder Attachment-C2 (Optional)

This section explains how to use the optional Envelope Feeder Attachment-C2.
2
The optional Envelope Feeder Attachment-C2 can only be attached to Paper Drawer 1.

How to Use the Envelope Feeder Attachment

The following six types of envelopes can be loaded into the envelope feeder attachment: COM10
No.10, Monarch: Catalog Glove No.8, DL, ISO-B5, ISO-C5, and Yougata 4.
If you are using COM10 No. 10 envelopes, load them after checking the following:
•
Make sure that [COM10] is selected for ENV.1 in Common Settings (from the Additional Functions
screen).
•
The guides are adjusted to hold COM10 No. 10 envelopes.
•
The paper size dial is set to 'Env.' , and the size switch is set to 'ENV.1' .
•
When you attach the envelope feeder attachment to the paper drawer, do not forcefully move the front guide of the
paper drawer in the wrong direction. Doing so may detach the envelope feeder attachment from the paper drawer.
•
Do not print on both sides of an envelope. Doing so may cause paper jams, dirty prints, or make the inside of the
machine dirty.

Envelope Feeder Attachment-C2 (Optional)

2-14