Canon 3245 Troubleshooting Manual page 52

1
Main Power and Control Panel Power
1-16
•
Once the message <Reservation copies can be made.> appears on the touch panel display, you can specify
settings, and copying or printing begins automatically as soon as the machine finishes warming up. (See
e-Manual > Copy.)
•
In the case above, the standard settings are selected.
•
The standard copy settings are:
-
Copy Ratio: Direct (100%)
-
Paper Selection: Auto Paper Selection
-
Copy Exposure: Automatic Exposure Adjustment
-
Copy Quantity: 1
-
Copy Function: 1 1-sided copy
•
The standard settings for each function of the machine (Copy, Mail Box, Send, and Fax) are already set at
the factory, but you can change them to suit your needs. (See e-Manual > Copy, Mail Box, and Send/Fax.)
•
You can select which functions to display on the Basic Features screen when turning ON the main power,
according to the Additional Functions settings. (See e-Manual > Additional Functions.)
•
If you press [→] on the Basic Features screen right after the machine is activated, the screen will be blank.
Wait for a moment, and then press [→] again.
•
If a Macintosh, which has been shut down, is connected to the machine via a USB cable, when you turn the
machine ON, the Macintosh may also turn ON. In this case, disconnect the Macintosh from the machine.
(You may also be able to solve this problem by using a USB hub between the machine and the Macintosh).
If login authentication by a login service (SSO-H) is not set, and MEAP is selected as
the initial function in Common Settings (from the Additional Functions screen):
☐ The Start Up screen is displayed until the machine is ready to scan.