Adjusting A Paper Drawer To Hold A Different Paper Size - Canon C9075 PRO Operating Manual

Adjusting a Paper Drawer to Hold a Different Paper Size

If you want to load a different paper size into a paper drawer, follow the procedure described below to adjust the paper drawer
guides.
Only LTR transparencies can be used. Make sure that the left guide is set to 'LTR' when loading transparencies in a paper drawer. If
transparencies of a different size (other than LTR) are loaded in a paper drawer, the paper size and remaining amount of paper will not be
1
detected correctly.
1
Press and release the button on the paper drawer that you want to adjust . Grip the handle, and pull
out the paper drawer until it stops . Remove all of the remaining paper .
2
Slide the left guide to align it with the mark for the desired paper size .
Slide the guide until it clicks into place.
1-6
Paper Drawers
Left Guide