Saddle Stitcher Unit Of The Booklet Finisher-A1 (Optional) - Canon C9075 PRO Operating Manual

Hide thumbs Also See for C9075 PRO:
Table of Contents

Advertisement

Saddle Stitcher Unit of the Booklet Finisher-A1 (Optional)

If a paper jam occurs inside the saddle stitcher unit of the Booklet Finisher-A1, a screen prompting you to remove the jammed
paper appears on the touch panel display. Check the location of the paper jam, and follow the procedure described below, and
the procedure that appears on the touch panel display, to remove the jammed paper.
There are some areas inside the machine which are subject to high-voltages . When removing jammed paper or when inspecting
the inside of the machine, do not allow necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may
result in burns or electrical shock .
2
When removing jammed paper, take care not to cut your hands on the edges of the paper .
When removing paper which has become jammed inside the machine, take care not to cut your hands or injure yourself on the
inside of the machine . If you cannot remove the paper, contact your local authorized Canon dealer .
When removing paper which has become jammed inside the machine, take care not to allow the toner on the jammed paper
to come into contact with your hands or clothing, as this will dirty your hands or clothing . If they become dirty, wash them
immediately with cold water . Washing them with warm water will set the toner, and make it impossible to remove the toner stains .
When removing paper which has become jammed inside the machine, remove the jammed paper gently to prevent the toner on
the paper from scattering and getting into your eyes or mouth . If the toner gets into your eyes or mouth, wash them immediately
with cold water and immediately consult a physician .
Take care when handling the optional equipment that is attached to the machine. When an optional unit's cover is opened to replace a staple
cartridge, discard the punch waste, discard the trim waste, or clear paper or staple jams, prints may still be output if other optional units are
operating normally, and are not involved in the paper or staple jam removal procedure.
1
Open the front cover of the finisher .
2
Open the guide (F-C1) .
2-74
Clearing Paper Jams

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents