3
Open a package of paper, and remove the paper stack .
When loading paper, take care not to cut your hands on the edges of the paper .
•
Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight.
•
If you print on the paper which has absorbed moisture, steam may come out from the output area of the machine. This is because the
1
moist on the paper evaporates when the high temperature is applied when toner is fixed to the paper. It is not a malfunction. (This
especially happens in low room temperature.)
•
For high-quality printouts, use paper recommended by Canon.
•
Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding.
4
Load the paper stack into the paper drawer .
Even out the edges of the paper stack. Load the paper stack against the right wall of the paper drawer.
•
Paper which has been rolled or curled must be straightened out prior to use.
•
Make sure that the height of the paper stack does not exceed the loading limit mark (
1-4
Paper Drawers
) at the back of the paper drawer.