Saddle Stitcher Unit Of The Booklet Finisher-B1 (Optional) - Canon C9075 PRO Operating Manual

Saddle Stitcher Unit of the Booklet Finisher-B1 (Optional)

If a staple jam occurs inside the saddle stitcher unit of the Booklet Finisher-B1, a screen prompting you to remove the jammed
staples appears on the touch panel display. Check the location of the staple jam, and follow the procedure described below, and
the procedure that appears on the touch panel display, to remove any jammed staples.
•
If necessary, make sure to remove all of the paper in the Booklet tray before clearing a staple jam inside the saddle stitcher unit.
•
Make sure to close all covers and drawers of the machine before clearing any staple jams.
2
1
Open the front cover of the finisher .
2
Grip the saddle stitcher unit by its handle, and pull it out of the finisher until it stops .
3
Pull the stapler unit of the saddle stitcher unit towards you, and then push it up .
2-106
Clearing Staple Jams
Saddle Stitcher Unit
Staple Unit of the
Saddle Stitcher Unit