8
Close the front cover of the finisher .
1
When closing the front cover of the finisher, be careful not to get your fingers caught, as this may result in personal injury .
When you have replaced the staple cartridge, be sure to manually reposition the staples in the saddle stitcher unit. (See e-Manual >
Settings/Registration.)
Removing Punch Waste
When the punch waste tray of the External 2/3 Hole Puncher-A1 becomes full, a screen prompting you to remove the punch waste
appears on the touch panel display. Follow the procedure described below to remove the punch waste.
This procedure is necessary only if the External 2/3 Hole Puncher-A1 is attached.
1
Open the front cover of the punch waste tray .
1-60
Staple Finisher-B1/Booklet Finisher-B1/External 2/3 Hole Puncher-A1 (Optional)