Canon C9075 PRO Operating Manual page 31

7
Remove the outer size change plate .
8
Align the outer size change plate with the marks for the desired paper size that you want to load .
(SRA3)
320mm 450mm
330mm 483mm
13 19 12 / 5 17 / 11
8 16
305mm 457mm
A4/A3
12 18
11 17/LTR
B5/B4
A4 R
LGL/LTR R
•
Make sure to align the outer size change plate properly with the marks for the desired paper size. There are two locations with marks for
the paper size on the top of the outer size change plate. Align the outer size change plate with the desired marks.
•
Make sure that the size change plate is properly aligned with the marks for the desired paper size. If the size change plate is not properly
aligned, the pod deck lite may become damaged.
1
1-19
Paper Drawers