Canon C9075 PRO Operating Manual page 43

3
Load the desired paper to approximately 3/8" (10 mm) in height . Slide the outer size change plate
and inner size change plate to align them with the desired paper size .
If you use a paper which length of the parallel edge to the feeding direction is longer than 18" (457.2 mm), slide the paper holder plate to
the right edge, press the button on the paper holder plate, and then fold down the paper holder plate.
If the paper holder plate is folded down, proceed to step 6.
Do not subject the paper holder plate to shock when loading paper into the paper deck, as this may result in a malfunction or damage
to the machine.
Adjust the guides correctly to avoid causing a paper jam, dirty prints, or making the inside of the machine dirty.
Multi-drawer Paper Deck-A1 (Optional)
1
1-31