Table of Contents
Advertisement
Original scanning area (thin glass strip) is dirty.
Cause
The feeder's scanning area is dirty.
Remedy
Clean the feeder's scanning area. (See "Duplex Color Image Reader Unit-A1, " on p. 1-69.)
Adjusting gradation. Please wait a while.
Cause
The machine is performing an automatic gradation adjustment.
Remedy
Wait for the machine to finish the automatic gradation adjustment. When the adjustment is complete, printing automatically
resumes.
Preparing for color printing. Please wait.
Cause
The machine is performing an automatic adjustment.
Remedy
Please wait for a moment. Color printing resumes automatically when the adjustment is finished.
This number has not been registered. Enter the number again.
Cause
The Department ID and password you entered are not registered.
Remedy
Contact the system manager of your Department for the correct Department ID and password.
Check covers are closed.
Cause
The cover of the optional equipment is open.
Remedy1
Check that the cover of the Multi-drawer Paper Deck-A1 is closed.
Remedy2
Check that covers of the Staple Finisher or Booklet Finisher are closed.
Remedy3
Check that the cover of the Document Insertion Unit-H1 is closed.
Remedy4
Check that the cover of the Document Insertion/Folding Unit-G1/Document Insertion Unit-J1 is closed.
Remedy5
Check that the cover of the Paper Folding Unit-G1 is closed.
Remedy6
Check that the cover of the Professional Puncher Integration Unit-B1 is closed.
Remedy7
Check that the cover of the External 2/3 Hole Puncher-A1 is closed.
Load staples.
Cause
There are no staples in the staple cartridge of the Staple Finisher or Booklet Finisher stapler unit.
Remedy
Replace the staple cartridge of the Staple Finisher or Saddle Finisher stapler unit. (See "Replacing the Staple Cartridge in the Stapler
Unit, " on p. 1-42. (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)), (See "Replacing the Staple Cartridge in the Stapler Unit, " on p.
1-54. (imageRUNNER ADVANCE C7065/C7055)
Check the punch waste tray.
Cause
The punch waste tray of the Staple Finisher or Booklet Finisher is full or almost full.
Remedy1
Remove the punch waste in the punch waste tray of the Staple Finisher or Booklet Finisher. (See "Removing Punch Waste, " on p.
1-52.)
Remedy2
Remove the punch waste in the punch waste tray of the External 2/3 Hole Puncher-A1. (See "Removing Punch Waste, " on p. 1-60.)
Load staples into the saddle stitcher unit.
Cause
There are no staples in the staple cartridge of the Booklet Finisher saddle stitcher unit.
Remedy
Replace the staple cartridge of the Booklet Finisher saddle stitcher unit. (See "Replacing the Staple Cartridge in the Saddle Stitcher
Unit, " on p. 1-48. (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)), (See "Replacing the Staple Cartridge in the Saddle Stitcher
Unit, " on p. 1-57. (imageRUNNER ADVANCE C7065/C7055)
2-111
List of Error Messages
2
Hide quick links:
Advertisement
Table of Contents
