Clearing Staple Jams; Staple Finisher-A1/Booklet Finisher-A1 (Optional) - Canon C9075 PRO Operating Manual

Clearing Staple Jams

If a staple jam occurs, follow the procedure described below to remove the jammed staples.

Staple Finisher-A1/Booklet Finisher-A1 (Optional)

If a staple jam occurs in the stapler unit of the Staple Finisher-A1 or Booklet Finisher-A1, a screen prompting you to remove the
jammed staples appears on the touch panel display. Check the location of the staple jam, and follow the procedure described
below, and the procedure that appears on the touch panel display, to remove any jammed staples.
2
Take care when handling the optional equipment that is attached to the machine. When an optional unit's cover is opened to replace a staple
cartridge, discard the punch waste, discard the trim waste, or clear paper or staple jams, prints may still be output if other optional units are
operating normally, and are not involved in the paper or staple jam removal procedure.
1
Open the front cover of the finisher .
2
Remove the paper waiting to be stapled from the delivery tray .
3
Pull out the staple case .
2-98

Clearing Staple Jams