Specifying Whether To Add The Transmission Source Information When Faxing Or When Forwarding Received Documents (Mode 352) - Oce VarioLink 2221 User Manual

10
Specifying whether to add the transmission source information when
faxing or when forwarding received documents (mode 352)
You can specify how the transmission source information is added when
faxing directly and when forwarding received documents.
Factory settings
Bit
Setting
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7, 6
5
4
3, 2, 1, 0
10-38
7 6 5 4 3 2 1 0
1 1 0 1 0 0 0 0 (HEX: D0)
Description
-----------------------------
Specifies whether transmis-
sion source information is
added when forwarding re-
ceived documents.
Specifies how transmission
source information is added
when forwarding received
documents.
-----------------------------
Specifying management settings
Status Description
11 *Do not change this bit when
specifying settings for this
function.
0 Not added
1 Added
0 Outside body text
1 Inside body text
0000 *Do not change these bits
when specifying settings for
this function.
VarioLink 2221/2821/3621
Page
Refer-
ence
---------
page 10-
5
---------
---------