Specifying Whether Or Not The Destination Name Is Inserted (Mode 001) - Oce VarioLink 2221 User Manual

10

Specifying whether or not the destination name is inserted (mode 001)

Select whether or not the destination name is inserted as transmission
source information.
Factory settings
Bit
Setting
Specifying settings
The shaded cells indicate the factory settings. The page numbers on the right
side refer to the descriptions for the corresponding function.
Bit
7, 6, 5,
4, 3, 2, 1
0
10-32
7 6 5 4 3 2 1 0
0 0 0 1 0 1 0 0 (HEX: 14)
Description
-------
Specifies whether or not the
destination name is inserted.
Specifying management settings
Setting Description
000101 *Do not change these bits
0 when specifying settings for
this function.
0 The destination name is not
inserted.
1 The destination name is in-
serted.
VarioLink 2221/2821/3621
Page Ref-
erence
-------
-------