Setup
3.12
IP Filtering
Select whether or not reception is possible within the range of specified IP
addresses. As an example, this section provides the procedure for specifying
the range where access is permitted. The range where access is denied is
specified in the same way as the range where access is permitted.
Settings can be specified for the following.
Item
Accept Setting
Deny Access
Note
0.0.0.0 cannot be included in a specified range. For example, to specify
the range of addresses before 192.168.1.20, specify the range from
0.0.0.1 to 192.168.1.20.
To specify IP filtering settings
1
In the Network Setting screen, touch [IP Filtering].
2
Touch [Accept Setting] or [Deny
Access].
3
Touch [Enable] or [Disable].
VarioLink 2221/2821/3621
Description
Reception of only the IP addresses in the specified range is per-
mitted.
IP addresses in the specified range are blocked.
3
3-49