Changing Or Deleting A One-Touch Dial Button - Oce VarioLink 2221 User Manual

6

Changing or deleting a one-touch dial button

1
Perform steps 1 through 4 of the procedure in "To program a one-
touch dial button".
2
Touch the one-touch dial button to
be changed or deleted.
– If the specified one-touch dial
button is programmed as an
administrator forwarding
destination, the screen for
entering the administrator
number appears.
3
Touch the button for the information
to be changed, and then make the
change.
– To delete the information, touch
[Delete].
4
Check the information to be registered, and then touch [Enter].
5
Touch [Enter] until the initial screen appears.
6-30
Scan to SMB
VarioLink 2221/2821/3621