9
9.13
Report Settings (Administrator mode)
The conditions for outputting the transmission results report and activity
report can be specified.
Settings can be specified for the following.
Item
TX Report
(Single destina-
tion)
TX Report
(Multiple desti-
nations)
Activity Report
9-62
Specifying settings using Web Connection
Description
Select the conditions for outputting the results report for a transmission to a
single destination.
Output On: Select this setting to output the report, regardless of the transmis-
sion result.
If TX Fail: Select this setting to output the report only if the transmission failed.
Output Off: Select this setting to not output the report, regardless of the trans-
mission result.
Select the conditions for outputting the results report for a transmission to
multiple destinations.
Output On: Select this setting to output the report, regardless of the transmis-
sion result.
If TX Fail: Select this setting to output the report only if the transmission failed.
Output Off: Select this setting to not output the report, regardless of the trans-
mission result.
Select whether or not the activity report is outputted with every 50 transmis-
sions.
VarioLink 2221/2821/3621