Ldap Setting; Ldap Search - Oce VarioLink 2221 User Manual

3
3.11

LDAP Setting

The settings used by the LDAP (Lightweight Directory Access Protocol)
server in a network can be specified.
Settings can be specified for the following.
Item

LDAP Search

LDAP Server Setting
Search Default Setting
LDAP Search
1
In the Network Setting screen, touch [LDAP Setting].
2
Touch [LDAP Search].
3
Select whether to allow LDAP
searches.
– If [Yes] was selected, specify the
LDAP server settings.
3-44
Description
Select whether to enable or disable the address search used by
an LDAP server. When "Yes" is selected, an LDAP server can be
specified.
Register the LDAP server to be accessed. Up to 5 LDAP servers
can be registered in this machine.
When multiple LDAP servers are registered, select the primary
LDAP server for performing searches.
VarioLink 2221/2821/3621
Setup