Searching For A One-Touch Dial Button - Oce VarioLink 2221 User Manual

4

Searching for a one-touch dial button

To find a one-touch dial button, the name of a destination registered with the
button can be searched for.
1
Position the document to be scanned.
2
Press the [Fax/Scan] key.
3
Touch [Search].
– If "LDAP Search" in the Network Settings screen is set to "Yes", a
screen appears, allowing you to select the search method. Touch
[Search One-Touch Keys] when the screen appears.
4
Type in the destination name, and
then touch [Search].
A screen appears, containing the
one-touch dial buttons programmed
with a destination that begins with
the entered name.
5
Touch the desired one-touch dial
button.
– You can specify multiple
destinations for simultaneous
transmission with the same one-
touch dial button. Up to 300
destinations can be specified at a
time.
– If LDAP searches are possible,
touch [LDAP Search] to perform a searches.
4-8
Scan to E-Mail
VarioLink 2221/2821/3621