Stop Faxing; Setting Scanner Glass Size For Faxing; Colour Fax Transmission - Brother MFC-J650DW Basic User's Manual

g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)

Stop faxing

To stop faxing, press
Setting scanner glass size for
faxing
When documents are Letter size, you need to
set the Scan Size to Letter. If you do not, the
side portion of the faxes will be missing.
a
Load your document.
b
(MFC-J650DW)
Press (Fax).
(MFC-J870DW)
Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press

(Fax) and then
(Sending Faxes).
c
Press Options.
d
Press a or b to display
Glass Scan Size.
e
Press Glass Scan Size.
f
Press Letter (or A4).
g
Press OK.
h
Enter the fax number.
4
.
4
i
Press Fax Start.
NOTE
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User's Guide: Setting
your changes as a new default.)
• This setting is only available for sending
documents from the scanner glass.

Colour fax transmission

Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the
machine's memory. When you send a colour
fax, the machine will send it in real time (even
if Real Time TX is set to Off).
a
Load your document.
b
(MFC-J650DW)
Press (Fax).
(MFC-J870DW)
Do one of the following:
When Fax Preview is set to Off,

press (Fax).
 When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
c
Press Options.
d
Press a or b to display
Colour Setting.
e
Press Colour Setting.
f
Press Colour.
g
Press OK.
h
Enter the fax number.
Sending a fax
4
4
37