Operation From External And Extension Telephones; Using A Cordless External Telephone - Brother MFC-J650DW Basic User's Manual

NOTE
(MFC-J650DW)
Carefully guide the telephone line cord
and out the back of the machine.
(MFC-J870DW)
We recommend that you guide the
telephone line cord from the EXT.
socketout the right side of the machine.
Remove the protective cap (1) from the
right side of the machine, and insert it
into (2) so that it is not lost.
Carefully guide the telephone line cord
from the EXT. socket into the cable
channel and out the right side of the
machine.
Operation from external and
extension telephones
If you answer a fax call on an extension or an
external telephone, you can make your
machine take the call by using the Remote
Activation Code. When you press the Remote
Activation Code l 5 1 (l 9 1 for New
Zealand), the machine starts to receive the
fax.
If the machine answers a voice call and fast
double-rings for you to take over, use the
Remote Deactivation Code # 5 1 (# 9 1 for
New Zealand) to take the call at an extension
telephone. (See F/T Ring Time (Fax/Tel
mode only) on page 43.)
If you answer a call and no one is on
the line:
1
Assume you are receiving a manual fax.
Press l 5 1 (l 9 1 for New Zealand) and wait
for the chirp or until the Touchscreen shows
Receiving, and then hang up.
NOTE
2
Using a cordless external
telephone
Once the base unit of the cordless telephone
has been connected to the same telephone
line as the machine (See External and
extension telephones on page 58.), you can
answer calls on the cordless handset during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine and press Pickup
to send the call to the cordless handset.
Telephone and external devices
You can also use the Fax Detect feature to
make your machine automatically take the
call. (See Fax Detect on page 44.)
6
6
6
6
59