Printing Received Faxes - Brother MFC-J650DW Basic User's Manual

Brother all in one printer
Hide thumbs Also See for MFC-J650DW:
Table of Contents

Advertisement

Printing Received Faxes

Difficulty
Condensed print
Horizontal streaks
Top and bottom sentences are
cut off
Missing lines
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
Left and right margins are cut off or
a single page is printed on two
pages.
Received colour fax prints only in
monochrome.
Telephone Line or Connections
Difficulty
Dialling does not work.
(No dial tone)
The machine does not answer
when called.
134
Suggestions
Usually this is caused by a poor telephone connection. Make a copy; if your copy
looks good, you probably had a bad connection, with static or interference on the
telephone line. Ask the other party to send the fax again.
problem is with the sending machine. Try receiving from another fax machine.
If the received faxes are divided and printed on two pages or if you get an extra
blank page, your paper size setting may not be correct for the paper you are using.
(See Paper Size on page 27.)
Turn on Auto Reduction. (See Advanced User's Guide: Printing a reduced
incoming fax.)
Replace the colour ink cartridges that have reached the end of their life, and then
ask the other person to send the colour fax again.
(See Replacing the ink cartridges on page 88.)
Suggestions
Check the line cord connections.
(Not available in New Zealand)
Change the Tone/Pulse setting. (See Quick Setup Guide.)
If there is no dial tone, connect a known-working telephone and telephone line
cord to the socket. Then lift the external telephone's handset and listen for a dial
tone. If there is still no dial tone, ask your telephone company to check the line
and/or wall socket.
Make sure the machine is in the correct Receive Mode for your setup.
(See Choose the Receive Mode on page 40.) Check for a dial tone. If possible, call
your machine to hear it answer. If there is still no answer, check the telephone line
cord connection. If there is no ringing when you call your machine, ask your
telephone company to check the line.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j870dw

Table of Contents