Replacing The Swivel Bar Or Optional Cradle Attachment - Invacare JASMINE Owner's Manual

Replacing the Swivel Bar or Optional Cradle Attachment

After the first year of use, the hooks of the swivel bar and mounting brackets of the boom should
be inspected every six months to determine the extent of wear. If these parts become worn,
replacement MUST be made.
NOTE: For this procedure, refer to FIGURE 7.4.
1. Remove the side covers.
NOTE: Support the swivel bar or cradle attachment from underneath while removing the attaching hardware.
2. Remove the socket head screw, washer, bushings, nylon spacers, washer and nut that attach the swivel bar or cradle
attachment to the boom.
NOTE: When the attaching hardware is removed, the pin, washer and o‐ring will become loose.
3. To install the swivel bar, reverse STEPS 1‐2.
DO NOT overtighten the nut and socket head screw. This damages the mounting bracket.
Bushing
Washer
Socket Head Screw
Side Rubber Cap
Part No 1150704
Nylon Spacer
O-ring
Washer
FIGURE 7.4 Replacing the Swivel Bar or Optional Cradle Attachment
WARNING
CAUTION
Top Rubber Cap
Washer
Nut
Bushing
Nylon Spacer
Swivel Bar
Pin
Bottom Rubber Cap
25
SECTION 7—MAINTENANCE
Side Rubber Cap
Optional Cradle
Attachment
Jasmine™ Patient Lift