Rear Panel View - Strong SRT 5400 User Manual

REAR PANEL VIEW

4
TV ANT IN : RF input for connecting the STB to a terrestrial antenna using a coaxial cable.
1
RF Out : To Connect to another set top box or recording device e. g. VCR / TV.
2
VIDEO (YELLOW) : Composite video jack for connecting the STB to your television using
3
Variable Audio - L (WHITE) : Left RCA audio jack for connecting the STB to your television
4
Variable Audio - R (RED) : Right RCA audio jack for connecting the STB to your television
5
S/PDIF COAXIAL : Digital audio output for connecting the STB to your AV receiver or Dolby
6
FIXED Audio - R (RED) : Right RCA audio jack for connecting the STB to your VCR audio
7
FIXED Audio - L (WHITE) : Left RCA audio jack for connecting the STB to your VCR audio
8
YPbPr OUT(Component) : Component RCA video jacks for connecting the STB to your
9
1 3 6 8
2 5 7 9 10
standard RCA cable.
audio input using standard RCA cable.
audio input using standard RCA cable.
Digital decoder using digital coaxial cable. Set this output to AC-3 Dolby
Digital or Stereo PCM in the STB setup menu or by the SAP button on
the remote control.
input using standard RCA cable.
input using standard RCA cable.
television using coaxial cables.
STRONG HD STB User's Manual
11
12 13 14
5
15