Volume Control - Strong SRT 5400 User Manual

Scroll to Display Type and push OK
Display Type banner will be viewed listing 4 Topics.
The current Video Setting will be highlighted by a Red Dot
Scroll to your selected setting of either DVI or RGB monitor or RGB component
Push OK button on the remote control and setting will be confirmed by Red Dot:
Important : On your TV Remote Control, select the corresponding television input mode
via the TV/Video button.
Selecting and Changing Channels
There are 2 methods to select and change channels
A. Press the required Numeric Button on the Remote Control (0-9).
Please Note : SRT5400 has default LCN – Logical Channel System
1 = Ten Network & Affiliates
2 = ABC
3 = SBS
7 = Seven Network & Affiliates
9 = Nine Network & Affiliates
B. Select and change channels by using the Up/Down channel
Buttons CH + (14) CH – (16)

Volume Control

To adjust Volume UP and DOWN, press the following buttons on the remote control:
Volume Increase : VOL Button + (13)
Volume Decrease : VOL Button – (15)
Important : The Volume Level is dependant on the volume level that you firstly set within
your TV I.e. via your TV remote control volume setting.
Volume Mute
Press Mute button (2) on the remote control
Press Mute button again to reactivate sound.
STRONG HD STB User's Manual
15