Strong SRT 5400 User Manual page 22

STRONG HD STB User's Manual
Figure 7. Scanning Progress Information Panel
New Program can search from Manual Scan on Setup menu. While search progresses,
scanning progress Information Panel(Figure 7) displays the status.
By user selection, First detect RF locking for each channel and channel descript information
search starts with time out value (1 second). If program is found but no channel descript
information is found within time out, set major channel to physical channel and set minor channel
default value 1. Default channel name is set to 'CHAN-<channel number>. The found data are
stored into program information file and used for later tuning. The channel information file
records following information to tune and describe the program for each found program.
Initially the program information file is cleared to zero. The contents of program information is
sorted with respect to the Logical Channel number value. If logical channel number already
exists, extra channel will be allocated a different Logical channel number
Parental Guide Set-up
To enable control of viewing acceptable programs: I.e You may want to "Lock Out' from view
particular Broadcast Programs.
22