Installation - Strong SRT 5400 User Manual

INSTALLATION

CONNECTING THE SRT 5400 TO YOUR TELEVISION
For connection of the SRT 5400 there are number of alternatives depending what is your
preference and the connection types on your TV.
Please connect by either of the following methods:
For High Definition VIDEO Signal
A. B. C.
For Standard Definition VIDEO Signal
D. E.
Mandatory for Antenna connection
F.
(Audio connections are explained separately following these video connection explanation
alternatives)
Refer to Page 5 & 6 for the Connector Reference Numbers listed below.
A. Connector 9 : YPbPr (Component – For HD)
Using supplied Green / Blue / Red RCA Lead
Connector 9
B. Connector 10 : VGA (For PC RGB signal- For HD)
You will need to purchase this lead separately.
Connector 10
C. Connector 14: DVI-I (For HD)
You will need to purchase this lead separately
Connector 14
D. Connector 11: S-Video (Y/C) (For SD)
You will need to purchase this lead separately
Connector 11
YPbPr Connect to the Green/Blue/Red RCA
( Component ) ( Component ) Connectors of your TV
VGA Connect to the VGA connector of your TV
DVI Connect to the DVI connector of your TV
S Video (Y/C) Connect to the S-Video connector of your TV
STRONG HD STB User's Manual
9