Scroll to Full Scan and push OK button Twice on the remote control
Channel Scanning will now commence and will take approximately one minute and will
lock in all available frequencies in your area.
Once Full Channel Scan is completed, Set up Banner will be viewed with TV broadcast in
top right corner
This Picture in Menu TV broadcast will remain in view for 10 seconds and unit will then
revert to Full TV Broadcast.
SELECTING VGA AND DVI VIDEO MODE
Press the Menu button (Page7 No.26) on the remote control and a Main Menu Banner
will appear listing 7 topics.
Using Remote Control Up/Down Scroll Buttons, Scroll to Set Up
Push Remote Control OK Button
Set Up banner will be viewed listing 9 topics
STRONG HD STB User's Manual
14