Strong SRT 5020 User Manual page 18

4. Press OK.
The Parent Lock window appears.
5. Choose a type of security you want to set or cancel—Parent or Install—and press OK.
A submenu appears with two options: ON and OFF.
6. If the option you want—ON or OFF—is not highlighted, press CH ▼or CH ▲ and then press OK.
7. Press CH ▼ until the Old Pin option is highlighted and enter the current password. The current
password is either:
• 0000 if you have not set a password on the SRT 5020 before (0000 is the default factory
setting); or
• whatever password was last set for the SRT 5020.
8. If you have chosen to turn on a security setting, the New Pin option will be highlighted. Enter a
new 4-digit password sing the numeric keys on the remote control.
9. If you have chosen to turn on a security setting, the Confirm Pin option will now be highlighted.
Enter the same password you entered in the previous step.
10. If you don't want to set (or cancel) the other type of security—Install or Parent—press the AUDIO
button (the green button) on the remote control. The Main Menu re-appears. Press EXIT to return
to normal viewing.
11. If you want to continue setting security options, press the SUB button (the red button) on the
remote control. The Parent Lock window remains open for you to make further choices. Repeat
this procedure starting at step 5.
18